Make your own filament! High quality pellets specifically for 3D printing. Note that you need to dry these for actual use.
Polylactic acid or polylactide called PLA is a thermoplastic aliphatic polyester made of renewable resources like corn or starch. PLA has a relative low melting temperature, 175°C, and is a very hard material. You can use it for the most common prints and is easy to print with.
You only can print with the right temperature settings. The temperature setting can be different on your type of extruder. This is depending on the heat transfer from the extruder to the filament so you can use this as guideline but please adjust it to your own extruder.
Melting temperature: 175 °C
Nozzle temperature: 190°C - 220°C
Heated bed temperature: 30°C
The base material used in the filament. For more information on the different materials, please check the Filament information page
|Weight filament||1000 g|
|1 - 9:||excl € 12.46 incl € 14.95|
|10 - 24:||excl € 11.21 incl € 13.46|
|25 - 49:||excl € 10.59 incl € 12.71|
|50 - :||excl € 10.46 incl € 12.56|
|Need a larger quantity? Contact our Sales department.|
Discover products that go hand in hand with the Ingeo 4043D PLA pellets - Bag of 1 kg. These are products that have been purchased the most with the Ingeo 4043D PLA pellets - Bag of 1 kg. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.