Low cost plug and play 3D printer. Easy to use, nicely finished 3D printer with network and WIFI for convenient controlling the printer. No leveling of the buildplate is required and FlashPrint software is included, making this a very accessible and easy to use 3D printer. The Adventurer 3 also has a camera, allowing you to track the progress of the print and make cool time-lapses.
The FlashForge Adventurer is the Finder's big brother. This plug and play machine is ready to print right out of the box! The Adventurer boasts 150mm x 150mm x 150mm build volumes and high quality performance.
Other enhancements compared to the Finder are a removable heated bed, automated bed-leveling routine, improved active cooling and upgraded hotend design with easy nozzle swapping for when you want to easily trade between fast prints (larger nozzles) and high quality (smaller nozzles).
The Adventurer has great connectivity options, with wireless cloud access and remote print supervision via its built in camera. The multi-language LCD interface and supplied slicer software gives this machine a very quick learning curve and is an easy introduction to 3D printing for curious adults and young inventors alike.
While only FlashForge's branded filament spools will fit inside the Finder's integrated filament compartment, the compartment isn't required, and any brand of filament can be used externally (external spoolholders available here or here). The high temperature hotend and heater bed allow for a much larger range of materials to be reliably printed; extra stick can be provided with adhesives such as our 3D LAC spray.
|Type||Adventurer 3 Wifi|
|3D printer properties|
The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.
|Resolution X axis||0.012 mm|
|Resolution Y axis||0.012 mm|
|Layer resolution||0.1 mm|
|Number of extruders||1|
|Nozzle diameter||0.4 mm|
|Filament diameter||1.75 mm|
|Hot-end type||MK10 Compatible|
|Max. hot-end temperature||240 °C|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
|Type of 3D printer||FDM/FFF|
|Product Dimensions||340x388x405 mm|
|Display type||128x64 Graphical LCD|
|Type of control interface||Touch screen|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.
Detect if you have run out of filament or that the filament is broken.
This machine has an enclosure to protect the print or product from outside influences.
|Input voltage||110/240 V|
|Operating voltage||24 V|
Adventurer 3 Wifi related products to keep you running.