Megatronics v3.2 - Basic kit

Megatronics, including stepper drivers

 
excl
€ 99.99
incl
€ 120.99
  • Dispatch same business day!
  • 2.000+ products available from stock
  • More than 25.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 7 years 3D experience)
Stock: 19

MEGATRONICSV3BASIC
8719128324982
19
Megatronics v3.2 - Basic kit

Price breaks

1 - 9: excl € 99.99 incl € 120.99
10 - 29: excl € 94.99 incl € 114.94
30 - : excl € 89.99 incl € 108.89
Need a larger quantity? Contact our Sales department.

Product description

Megatronics, including stepper drivers

Megatronics is based on many famous open-source products including: Arduino Mega, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more reliable 3D-printing. This board will get you the most features for the best price! 

Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.

 

Major features

Atmega2560
Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz

Thermo couple (2x)
On board support for connecting two thermo couples

SD Card
Autonomous printing from Micro SD card on board, also an external SD card is supported

LCD support
Hooking up a LCD is pretty easy. The Wiring is compatible with most LCD screens. We do not sell the required wiring yet, but you can use 6x2-wire cable.

Six MOSFETs
The board has 3 MOSFETs (3x 25A) to support  extruders, 2 MOSFETs fior fans and 1 MOSFET (IRLS3034PBF) for the heated bed

Four thermistors
Four thermistors are supported.

Up to 6 stepper drivers
Compatible with RAMPS, 6 slots for stepper drivers (not included). Modularized to make replacement easy for damaged drivers. This board also support the new DRV8825 driver from Pololu http://www.pololu.com/catalog/product/2132.

Support for many peripherals
The board's functions can be easily extended with LCD, keypad etc. See the connectors section for more information

Other features

  • USB 2.0 Full Speed compatible
  • Auto reset can be disabled by removing a jumper
  • The board can be powered from 12-24V
  • The LCD contrast can be adjusted with a trimpot
  • The 5V line is protected by a 500mA resettable fuse
  • A piezo is included to allow the printer to give feedback with sound
  • Each stepper driver slot has a breakout to connect external stepper drivers to the board.
  • Four layer high quality PCB board

Board dimensions

Width: 109.5mm
Length: 90.5mm
Height: 18mm

Datasheet: Coming soon
Marlin firmware: See download section (service -> software downloads)

 

About ReprapWorld

The ReprapWorld Brand contains high-value products for the best 3D print experience. Selected for the amateur and pro alike, these products will make your life easier. By choosing for ReprapWorld products, you are certain to get a great quality product for a great price. The brand includes products of our own design as well as products tested by us.

Specifications

Processor

Technology AVR
Type Atmega2560
Frequency 16 MHz
Memory 512

Dimensions

Length 110 mm
Depth 95 mm
Height 18 mm

Features

Thermistors 4
Endstops 6
Stepper drivers 6
Thermocouples 2
Sound
LCD
Keypad connector
SD Card
External SD card
External stepper drivers 6
Ethernet
Seperated heated bed input
MOSFETs 6

Documentation

Questions & Answers

Add-ons

Product
SKU
 
LCD - 20X4 - blue/white
Good value blue LCD with 4 lines of 20 characters in white enabling you to autonomously control your 3D printer
LCD20X4B/W
 
Keypad v1.0 - Fully Assembled
Upgrade your printer to have a keyboard! Not compatible with Megatronics 3.2
KEYPADASS

About ReprapWorld
ReprapWorld

ReprapWorld is the number one webshop for all your reprap supplies for your 3D printer. We have a large collection of 3D printer components, from our famous electronics lines to filament from our own production. And everything is at a very competitive price!

Contact

RepRapWorld B.V.
Wagenmaker 6a
2631RL Nootdorp
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2018 | RepRapWorld B.V.